can you use two jacks on one car

Can You Use Two Jacks On One Car? Find Out Here!

by

Replacing a flat tire with the spare requires that you use the jack. It is used to raise the vehicle for easier removal and mounting of the tire.

Its usage is, however, not limited to when you want to remove or mount a new tire. Due to the necessity of its usage at times, some car owners wonder whether they can use jacks on the car.

Can you use two jacks on cars? As the occasion demands, you are free to use two jacks on a vehicle, provided the jacks are in good condition and you know how to apply them. Is there any risk in doing it? Under what condition can it be done? Read on for answers to these questions.

TRENDING SEARCHES

How can I use two jacks?

Using two jacks on one car is possible but you must know how to do it. You could be ruining the jack if you do not do it the right way. There are some conditions you should not compromise when you want to do it. Below are the steps you can follow when you want to use two jacks.

Use a flat terrain

If you intend to use two jacks on a car, you can only do it on a flat surface. If the surface is not flat, the weight of the vehicle could drift to the other end. You should locate any flat surface around you, and then properly pull over the car. Make sure the surface is free of all forms of dirt.

Engage the brake

You should not use the jacks on the vehicle once you pull over. You have to ensure proper safety. One of the things you should do is to engage the parking brake fully. Moreover, you should use wheel chocks. You should put the chocks on the other side of the car where you will be using the jacks.

Use floor jack

Once you are sure that the other side of the vehicle is secured, you can carefully place the jack under the jack spot in your vehicle. You can then raise the car slowly. However, you should watch out for signs of rolling and cracking.

Jack stand

If you have raised the car to the desired height, you can then put a jack stand under the car from the side where you have raised the car. You can then slowly lower the car so that the weight would fall on the jack stand. You can repeat this process to raise any other side of the vehicle that you desire.

Do the work

Once you can raise the sides that you want, you are free to do the task. For instance, if you are doing it to remove or replace tires, you are free to do it. You can also rotate the tires.

Note: If you desire to raise the vehicle from the back, you should place the jack on the designated jack point at the back of the vehicle. In a situation where you are raising the vehicle from the front, the jack should be placed in the middle of the front cradle.

What are the reasons for two jacks?

As a car enthusiast, at times, you begin to wonder what could be the reason for the usage of two jacks on a car. The following are some of the reasons why some people use two jacks on their car.

Protection

Did you know that the car is at risk when you use one jack? The other side will bear the weight of the vehicle and it could get overwhelmed, especially when you are not on a flat surface. In such a situation, the car could get ruined and it could also be risky for you.

Easier

When the car is raised with two jacks, it will be easier for you to do whatever you want to do. You can easily remove, replace, or rotate the tires. Moreover, you will have easier access to the underneath of the car.

Rest of mind

Working under the car when it is raised with one jack could make you feel uncomfortable. You might have a feeling that the jack could be overwhelmed and the vehicle could fall. However, when you use two jacks to lift the vehicle, you can work effectively underneath the car without the fear that the vehicle might fall on you.

What are the factors that could ruin the wheel?

Buying a quality wheel is a good way to protect the wheel from getting ruined. There are, however, some factors that will damage the wheel, depending on ownership. The following are some of the factors that could easily ruin a wheel.

Wrong size

The wheel could get damaged quickly when you install the wrong size, irrespective of the quality. For instance, if you have mounted a wheel that is not the right size and specifications for your vehicle, the wheel will get overwhelmed and will soon wear out.

Balancing

The balancing of the weight of the wheel is needed for your safety, comfortable driving, and to prevent quick wear on the wheel. Proper mounting of a quality wheel should be followed up with balancing and alignment. If you fail to do this, the wheel will soon show signs of wear. The same is also applicable to alignment and bearing. (Read Also:Will E46 Wheels Fit E90?Find Out Here!)

Care for the wheel

Caring for the wheel entails a lot of things. Though the wheel might look shining and attractive but still lack adequate care. For instance, if you wash the wheel regularly and you do not maintain the recommended pressure level, the wheel will soon wear out.

Also, overloading the wheel, irrespective of the look, will damage it quickly. You can read the manual for some of the things you can do to care for the wheel.

Condition of the road

The wheel comes in contact with different road surfaces often. The state of the road where you cruise the car will determine how soon the wheel will get damaged.

For instance, if you cruise the wheel often on a surface where it is exposed to sand, mud, and other forms of dirt, there is a high chance that it will get ruined quickly. The same is also applicable to using the wheel in harsh weather. Road salt during winter can easily ruin the wheel.

Driving attitude

The way you handle the vehicle when you are on the road also determines how soon the wheel will get damaged. If you drive often in an unfriendly manner, the wheel will soon go out of shape. Are you surprised about the unfriendly manner? The truth is running the wheel over speed bumps, potholes, and other hard objects on the road recklessly will ruin the wheel.

Neglecting little problem

The wheel will likely show signs of minor damage after a period of usage. Though it might continue to function but leaving the problem unattended could ruin the wheel. For instance, when the wheel begins to vibrate and you do not fix it, it could get detached from the vehicle.

Accident

No car owner desires an accident but when it happens, it could lead to the total damage of any part of the vehicle, depending on the severity of the accident. The wheel, just like other parts of the vehicle will easily get ruined when the car is involved in an accident.

Consequences of using a damaged wheel

Some of the things that could ruin the car wheel have been highlighted above. Now, it is time to discuss some of the things that will likely happen when the wheel is damaged and you do not replace it.

Beyond the wheel

The damage that the wheel could cause when it has a problem and you do not fix it is beyond the wheel. In most cases, it could affect the suspension of the vehicle, balancing, braking system, and the driving condition.

Risk to life

The wheel moves the vehicle with the support of the other parts. If it has issues and you do not resolve them, it will affect the performance of the vehicle and could lead to an accident. There are reports of the death of persons involved in an auto accident.

Additional expenses

It is either you fix a damaged wheel or you replace it. Though this will cost you a few bucks, you could spend more than that if you do not fix the problem quickly. For instance, if the damaged wheel affects the wheel stud or the suspension, you will be spending more than what it could have cost you initially to fix the wheel. Moreover, the vehicle will likely consume more fuel when the wheel is not in good condition.

Fatigue

If you ask many drivers, the driving interstate is a big task. That is why the vehicle needs to be in good condition so that you won’t experience any issues on the road. When the wheel has a problem and you do not fix it, you will get tired easily on the way.

Can You Use Two Jacks On One Car – Conclusion

You are free to use two jacks for your vehicle but ensure you are doing it on a flat surface. This article has provided insight into what you can do.

This post contains affiliate links. Read the full disclosure here.

Leave a Comment