Despite this careful design, some cars are known to have similar requirements in their rim specifications, such as rim diameters and radii, as well as their bolt patterns.
Of all these statistics, the bolt pattern is the most important when it comes to the selection of rims for your vehicles. What are some of the ways through which we can know the exact rims that will fit our cars?
Will Jeep Rims Fit Ram 1500? No, jeep rims will not fit the Ram 1500. Their rims are not in any way compatible, and it is important for us to know when wheels are not compatible.
Should you drive on incompatible wheels, you are basically risking the possibility of crashing and accidents. In addition, the use of any ill-fitting wheels will most likely cause premature tire wear and degradation.
Worthy of consideration is the fact that the wheels of both these vehicles have different bolt patterns. Therefore, no. You cannot fit jeep rims on Ram 1500.
What wheels from other cars will fit your car?
Wheels are commonly changed from one vehicle to another based on certain considerations, which include bolt patterns, sizes ( diameters and widths), centre bores, and types of offsets on the two vehicles. If you wish to swap wheels without any qualms, they both must have matching features.
Therefore, find out which other cars have these similarities in their wheels/ rims and bolt patterns with those of your car. In addition, try to match their offsets, centre bores, and lug nut sizes where possible.
But you should still keep it in mind that despite ensuring all these, there could still be more fitment and safety issues. To prevent this possibility, make sure that you check very well before any wheel use or swapping from other vehicles.
Are all jeep rims interchangeable?
No, not all jeep rims are interchangeable, since it primarily depends on the model of the jeep as well as its year(s) of production. For instance, a JK Wrangler car produced in 2018 is going to have a similar bolt pattern with another JK Wrangler car produced in the year 2007.
Along the same line, a TJ Wrangler model manufactured in 1997 will have the same bolt pattern as a TJ model produced in 1987, and so on.
What is a jeep wheel bolt pattern?
The bolt patterns of jeeps, and also all other cars too, depend on the years as well as the models of the cars.
Therefore, in line with this arrangement, all Wrangler cars produced between 2007 to 2018 have 5× 5 bolt patterns. This bolt pattern means that there are 5 lug nuts with 5-inch spacing.
Other earlier jeeps, such as the TJ Wrangler models that were produced between 1997 and 2006, as well as the TJ editions of 1987 to 2995, all use the bolt pattern 5×4.5. So, the bolt pattern of any jeep will actually depend on its model, as well as the year of its production.(Read Also:Will Jeep Wheels Fit Toyota Tundra?)
Is 5×5 the same as 5×114.3?
 They are the same to a great extent even though there are places or areas where they are different, but functionally speaking, they are the same.
To further expatiate on this summation, it should be known that they have the same bolt patterns. The bolt pattern of a vehicle is simply the diameter of an imaginary circle formed by the centres of the wheel lugs.
What are the best rims for jeep Wranglers?
 The jeep Wrangler is one of the few trucks worldwide to enjoy the guaranteed availability of various sizes of rims that are very interchangeable.
Although many of the models share the same rim features, you are still advised to check properly before deciding on what rim size to get for your truck.
Alternatively, if you are unable to do so independently, you can always refer to the service manual, or better still, you can ask experts on what is the most suitable option for you. There are many types of rims that are adjudged best for Jeep Wranglers. Some of these rims are:
(1). Pro Comp Series 69 Alloy Wheels
(2). Asanti Black Label ABL-14 Wheels
(3). America Racing Torq Thrust all Wheels
(4). ICON Six Speeds Wheels
(5). Konig Ampliform Wheels
(6). ICON Compression Wheels
(7). Pro Comp Series 32 Alloy Wheels
(8). Vision 141 Legend 5 Wheels, etc
How do you know if a rim will fit your car?
There are certain things or features to look out for if you want to determine whether certain rims will fit your car or not.
Despite these multiple compatibility determinants, one assured means of knowing with absolute certainty is the recommendations of the manufacturers, as may be contained in the user manual. If the manual says this and that are compatible rims, then so be it.
Alternatively, if the rims have the same size in both diameter and width as yours, then they will perfectly fit your car.
Other areas in which similarities must also be sought are the bolt patterns, offsets, centre bore, as well as the lug nut series too. If these features, or as many of them as possible, are the same, in addition to the bolt pattern, then you can be rest assured that they will fit your car perfectly.
How do I know my rim size?
Vehicle wheels are so designed and manufactured to fully and neatly fit the vehicle’s suspension system, gearing, as well as its bodywork.Â
To know which is your rim size, check the tire size on the sidewall of the original wheels or inside the frame of the driver’s door. The wheel diameter is usually the fifth set of numbers and letters.
The diameter of a wheel is the distance between the two bead seat areas, where the tire is sealed onto the wheel.
Wheel sizes include their width and offset numerical. The width of a rim is simply the distance between each bead seat from inside to the outside.
The offset also determines how the wheel and tire align with the wheel well. In other words, the offset also refers to how far inward or outward the mounting surface is, with reference to the centre line of the vehicle’s wheel.
What size rims can I put on my jeep?
The size of the rims you can put on your jeep will actually depend on its type and its year of production. Therefore, in order to give an answer that is satisfactory based on the type of jeep you have, the article will give an overall view of the rims for various jeeps.
First, for the Jeep JL Wrangler, the following are its rim specifics: bolt pattern -5×5 inches, lug nut size -14 mm × 1.5 inches, factory wheel size -17 to 18 inches, hub centre bore – 71.5 mm.
For the JK Wrangler jeeps, you have: bolt pattern – 5×5 inches, lug nut size - 1/2 × 20 inches, factory wheel size- 17 to 18 inches, hub centre bore -71.5 mm. There you are. So, it is believed that these figures will enable you to correctly determine the wheel size for your type of jeep.
Trending Searches
- 5 Best Floor Jack For Jeep Grand Cherokee In 2022
- 4 Best Jack For Goldwing 1800 In 2022
- 5 Best Jack For Single Axle Trailer In 2022
Frequently asked questions(FAQ)
Does width of rim matter?
Yes, the width of a vehicle’s rims matters tremendously. First, they influence the width of the tire as well. Any tire mounted on a narrower rim would be narrower than if the same size tire were mounted on a wider rim.
As a rule of thumb, for every 1/2 inch change in the rim width, the tire’s section width will correspondingly change by approximately about 1/5 inches as well. So, yes, the width of the rims matter. At least, for as long as the beads are seated.
Can I put wider tires on my stock rims?
Yes, you can put wider tires on your stock rims, at least up to a certain limit, but not beyond that, for reasons of safety.
For example, it is generally safe to fit a tire up to about 20 mm wider than the stock on the original rim. Although tire widths will always vary depending on the width of the rim also.
In response to the relationship between rim and tire, the tire will always expand by about 5 mm for every half inch or about a 12.5 mm increase in width.
If the rim is wider than the stock, there may really not be enough space or clearance to the ball joint or even the steering arm, which will allow for half the extra width to manoeuvre freely.
How do you tell the offset of a rim?
If you wish to tell the offset of a rim, execute the tips given underneath diligently. First, add about 1 inch to the width of the rim and divide the result by 2, so as to find the wheel’s centerline.
Second, convert the offset recorded in mm into inches. If the result is 25. 4 mm in 1 inch, divide the offset by 25.4.
Finally, add the converted offset to the centre line of the wheels, if the offset is positive, so as to get the correct backspacing.
Or subtract the converted offset from the centre line, if the offset is negative, to get the correct backspacing too. So, everything depends on whether the offset is either positive or negative really.
Is Ram 1500 a good truck?
Yes, the Ram 1500 is indeed a superb car. To be specific, its excellent ride quality and rear-seat legroom set it up as one of the most competitive full-size pickup truck classes anywhere in the world.
In addition, this vehicle has very impressive tow ratings, as well as exemplary fuel economy too. These are definitely qualities that cannot be easily bettered.
What are the benefits of buying a used Ram 1500?
Certain vehicles are rightly considered a good buy regardless of whether you got them new or fairly used, as long as they are still in top shapes and equally function properly.
The Ram 1500 truck is, without any doubt, one of those rare cars to relish buying either as new or as fairly used. To begin with, it is guaranteed to possess very long-lasting durability with available and affordable spare parts to cater for all your needs during replacements or repairs.
This rare truck also commands an above-average driving experience, especially when compared to other trucks based on its engine performance and efficiency.
Commonly, the truck runs on two engines, which are the gas-powered and diesel operated engines:Â the 3.0 Liter diesel V6Â and also the 3.6 Liter V8 engine. So, it’s an open choice, whichever one you prefer.
Finally, you are most likely going to get an offer that is hardly beatable by any other truck in that class bracket. In fact, its average price is about 21, 349 dollars.Â
This price is almost 5000 dollars less than you would get other trucks in the same class, such as what you would have to pay for a new Tradesman with no optional features as are available to you with the Ram 1500 truck.
Will Jeep Rims Fit Ram 1500 – Conclusion
Rims can be a headache to install in a vehicle if you make the mistake of making the wrong choice based on their dimensions.
It is for this very need that the manufacturers provide comprehensive information on what rim size will fit what vehicle.
To make matters easier for everyone, detailed information is given on the various models of jeeps and their years of manufacture, as well as the rims of other vehicles with which they are a good fit.
You are also regaled on ways and means by which you can determine the relevance of all given figures relating to how best your tires and rims are used.
It is easy to read the tire notations usually written on their sidewalls, as long as you know how to. Through these statistics, it is simple for you to know your tire and rim sized, as well as what their offset and bolt patterns are too.
This post contains affiliate links. Read the full disclosure here.
I am passionate about all things automotive and have a deep understanding of the topic. As a mechanic, I use my free time to share knowledge of everyday challenges that any car owner can experience – helping you make informed decisions about tires.